English-12
C ONNECTIONS
4
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
5
Connect a video cable
between the
VIDEO OUT jack on the
VCR and the AV IN
[VIDEO] jack on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
*
Each external input source device has a different back panel configuration.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left
and right audio input jacks of the TV.
TV Rear Panel
RF Cable
Audio Cable (Option)
VCR Rear Panel
TV Rear Panel
RF Cable
Audio Cable (Option)
Video Cable (Option)
VCR Rear Panel
BN68-00883A-00Eng.qxd 3/9/05 11:04 AM Page 12
To Next Page
Loading...
