How to fix Samsung LN26A450C1D remote control malfunctions?
If your Samsung Monitor remote control malfunctions, try these steps: * Replace the remote control batteries. * Clean the upper edge of the remote control (transmission window). * Check the battery terminals.
How to improve poor picture quality on Samsung LN26A450C1D?
If your Samsung Monitor has poor picture quality, try another channel, adjust the antenna, and check all wire connections.
What to do if my Samsung LN26A450C1D Monitor operates erratically?
If your Samsung Monitor operates erratically, unplug the TV for 30 seconds, then try operating it again.
How to remove black bars on Samsung LN26A450C1D Monitor screen?
If you see black bars on the screen of your Samsung Monitor, make sure the broadcast you’re receiving is High Definition (HD) and set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Why is closed captioning not working on my Samsung LN26A450C1D?
If closed captioning is not working on your Samsung Monitor and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
How to fix snowy picture on Samsung Monitor?
If your Samsung Monitor displays a snowy picture, your cable box may need a firmware upgrade. Please contact your Cable company.
How to fix ghosting on picture of Samsung LN26A450C1D Monitor?
If you are experiencing ghosting on the picture of your Samsung Monitor, try connecting Component cables instead.
How to center the image on my Samsung LN26A450C1D Monitor screen?
If the image is not centered on the screen of your Samsung Monitor, adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
Why does the picture appear distorted in the corner of my Samsung LN26A450C1D?
If the picture appears distorted in the corner of the screen on your Samsung Monitor, and "Just Scan" is selected with some external devices, this symptom is caused by the external devices, not TV.
Why does my Samsung LN26A450C1D Monitor say “Resets all settings to the default values”?
The “Resets all settings to the default values” message appears on your Samsung Monitor when you press and hold the EXIT button for a while. The product settings are then reset to the factory defaults.
General| Screen Size | 26 inches |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Input Ports | HDMI, Component, Composite, PC input (D-Sub) |
To Next Page
