Input cables (Sold separately)
HDMI HDMI-DVI Component Composite(AV) Coaxial (RF) VGA
Installing the Stand
Preset: Place the stand onto the Guide Stand and fasten it
using the screws.
1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of
the stand when attaching it.
To make sure the TV is installed on the stand at a proper
level, do not apply excess downward pressure to the
upper left of right sides of the TV.
2.
Fasten two screws at position
1
and then fasten two screws
at position
2
.
Stand the product up and fasten the screws. If you fasten
the screws with the LCD TV placed down, it may lean to
one side.
Disconnecting the Stand
1. Remove screws from the back of the TV.
2. Separate the stand from the TV.
Two or more people should carry the TV.
3
. Cover the bottom hole with the cover.
❑
¦
N
N
N
N
N
¦
N
To Next Page
Loading...
