Samsung LN40B530 - Picture and Screen Troubleshooting; Installing and Disconnecting the Stand

• Troubleshooting for Anynet+
Problem
Anynet+ does not work.
----_ .. _---
I want to start Anynet+.
I Possible Solution
The message Connecting to II- You cannot use the remote control when you are configuring Anynet+ or switching to a
Anynet+ device ... appears on the I view mode
~creen:.. . -+~ Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not I- You cannot use the play function when Plug & Play is in progress
play. ..
The TV program cannot be II - Check whether the antenna jack on the recording device is properly connected.
recorded.
-T-h-e-TV--s-o-u-nd-i-s-no-t-o-u·-t-p-u-t ---II- Connect the optical cable between TV and the receiver
through the receiver. I