What to do if the connected device is not displayed on my Samsung LN40B500P3FXZA LCD TV?
- JJames MilesJul 31, 2025
To resolve the issue of a connected device not being displayed on your Samsung LCD TV, first verify that the device supports Anynet+ functions. Check that the HDMI 1.3 cable is correctly connected. Ensure that Anynet+ (HDMI-CEC) is enabled in the Anynet+ setup menu. Try scanning for Anynet+ devices again. Keep in mind that only HDMI 1.3 cables can be used to connect an Anynet+ device. Some HDMI cables may not fully support Anynet+ functions. If the connection is interrupted due to a disconnected HDMI cable, power cord, or a power failure, repeat the device scan.