Need help?Do you have a question about the Samsung LN40C530F1F and is the answer not in the manual?
General| Audio system | SRS TS HD |
|---|---|
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Product color | Black |
| LED indicators | Stand-by |
| Panel mounting interface | 200 x 200 mm |
| 3D | No |
| Storage temperature (T-T) | -20 - 45 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Operating temperature (T-T) | 10 - 40 °C |
| Package depth | 170 mm |
| Package width | 1209 mm |
| Package height | 734 mm |
| Package weight | 21320 g |
| Response time | 6 ms |
| Display diagonal | 40 \ |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 80000:1 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Tuner type | Digital |
| Digital signal format system | ATSC |
| HDMI ports quantity | 3 |
| SCART ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical out | 1 |
| Sustainability certificates | ENERGY STAR |
| Audio formats supported | MP3 |
| Smart modes | Game, Movie |
Weight and Dimensions| Depth (with stand) | 240 mm |
|---|---|
| Width (with stand) | 970 mm |
| Height (with stand) | 653 mm |
| Weight (with stand) | 17400 g |
| Depth (without stand) | 78.6 mm |
| Height (without stand) | 600 mm |
| Weight (without stand) | 14500 g |
How to connect an antenna and perform the initial Plug & Play setup.
Instructions for connecting various external audio and video devices.
Adjusting preset picture modes, brightness, contrast, and color.
Adjusting sound modes, equalizer, and virtual surround settings.
Setting up channel locks, V-Chip, and program rating restrictions.
Solutions for common picture, sound, and connectivity problems.
Playing media files from USB devices, including photos, music, and videos.
Controlling connected Samsung devices and setting up Anynet+ functions.
To Next Page