Samsung LN40C530F1F - Antenna Connection and Initial Setup

WhentheTVisinitiallypoweredon,basicsettingsproceedautomatically.
Connectingthepowercordandantenna.
ii
VHF/UHFAntenna
or
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERLb button. Plug & Play is available only when the input source is set to TV.
To return to the previous step, press the red button.
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Selecting a cnanne
Setting the Clock
Mode
Viewing the HD
Connection Guide
Enjoy your T'7
Press the A or T button, then press the ENTERIZ_ button. POWER
Select the desired OSD (On Screen Display) language.
Press the _ or _, button, then press the ENTERIZ_ button.
,_ Select the Home Use mode. Store Demo Mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
Press the A or T button, then press the ENTERI_ button. Select Air, Cable or Auto.
<_ In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the A, _', ,_ or _ button, then press the ENTERI_ button.
The channel search will start automatically.
For more information, refer to Channel-_ Auto Program. (R13)
Press the ENTERIZ_ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
_ Ifyou select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERI_ button.
if You Want to Reset This Feature...
(_ MENUiTrl --_ Setup --_ Plug & Play --_ ENTER_
English 7