0
Bottom View
O
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV,
Stand the product up and fasten the screws, Ifyou fasten the screws with the LCD TV placed down, it may lean to one
side.
The product color and shape may vary depending on the model.
Power Indicator
I
Speakers
(Power) Turns the TV on or off,
: Remote control sensor Aim the remote control towards this spot on the W,
SOUROEE;# Toggles between all the available input sources, Inthe on-screen menu, use this
button as you would use the ENTER IZ_ button on the remote control,
MENU Displays an on-screen menu, the OSD (on screen display), of your TV's features.
_VOL+ Adjusts the volume, In the OSD, use the--VOL+ buttons as you would use the
4 and _. buttons on the remote control.
MONA Changes the channels. Inthe OSD, use the V CH /\ buttons as you would use the
T and A buttons on the remote control.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button isturned off, It is best to unplug the power cord,
English 5
To Next Page
Loading...
