Samsung LN40C530F1F - Anynet+ Features and Operation

Advanced Features
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on iL
To connect to a Samsung Home Theater
LN320530 / LN370530 / LN40C530 / LN460530
Anynet÷
TV HomeTheater Device1
Cable _ HDMICab
Anynet+
Device2, 3
HDMI Cable
LN40C540 / LN46C540
Anynet+
TV HomeTheater Device1
Anynet +
Device 2, 3, 4
J!'_ J!'l
Dptical [ JCable HDMICable
HDMI Cable
1. Connect the HDM_ _N(1(DW}, 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
NOTE
• Connect the Optical cable between the D_GITAL AUDIO OUT (OPTICAL} jack on your TV and the Digital Audio Input
on the Home Theater.
• When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGFAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
• Only one Home Theater can be connected.
• You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
• Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
• Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
0 English