Cauti0nlPulling,pushing,orc!imbingonthe_ maycausethe_tofa!!,Inparticu!ar,ensureyourchi!d[endo
not hangoverordestabilizetheTV.DoingsomaycausetheTVtotipover,causingseriousinjurieso_death.
allsafetyprecautionsprovidedintheSafetyFlyerincludedwithYoU_TV.F0_addedstab!!ityandsdetY,
you canpurchaseandinstalltheanti-falldeviceasdescribedbelow.
The TV-Holder Kit (Sold Separately)
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw
appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.
(M6 X L16 : 32 - 40 inch TVs) (MSX L19 : 46 inch TV)
TV_Holder (BN96_i 5753A) Screw(]) screw@
Installing the TV-Holder
1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in
the TV Holder Kit that is designated for your TV.
Make sure to use only the appropriate supplied screw. Ifyou use a different screw, you can damage your TV.
2,
3,
Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.
Ifyou fasten the screw to the wall, we recommend you drive the screw into a stud. Ifthat is not possible, use a
molly to anchor the screw.
Tie the TV-Holder cord to the screw fastened to the wall or cabinet so that the TV is fixed. See the illustrations below.
Install the TV close to the wall so that it does not fall.
When attaching the TV Holder cord to the wall, tiethe cord levelwith the ground or slanted downwards for safety purposes.
Check the cord occasionally to make sure it is secure.
Before moving the TV, separate the connected cord first.
To purchase the TV-Holder Kit, contact Samsung Customer Care
-In the United States: 1-800-Samsung (1-800-726-7864)
-In Canada: 1-800-Samsung (1-800-726-7864)
English 35
To Next Page
Loading...
