Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
When connecting to AV _N1, the
color of the AV IN 1 [Y/VIDEO] jack
Green/does not match the color of
[ne vlaeo cable (Yellow).
For petter picture quality, the
Component connection is
recommended over the A/V
connection.
Using an Optical (Digita 0 or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
',i ......................:..........:.............
D_GmTALAUDIO OUT (OPTICAL} !
° When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL} jack, decrease the volume !
of both the TV and the system. !
5.1 CH (channel)audio is availablewhen theTVis connected to an external device supporting 5.1 CH.
• When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the !
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is !
a digital component such as a DVD/Blu-ray player/cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. Ifyou want to !
hear 5.1 OH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite !
receiver directly to an amplifier or home theater. !
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater. !
° When connecting, use the appropriate connector (sold separately).
° When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
English 9
To Next Page
Loading...
