◀ ▶
English
❑❑ Switching❑between❑Anynet+❑Devices❑
1. Press the TOOLS button, then select Anynet+❑(HDMI-CEC).
2. Anynet+ devices connected to the TV are listed in Device❑List.
If you cannot find a device you want, press the
A
button to refresh the
list.
3. Select a device and press the ENTER
E
button. You can switch to the
selected device.
Only when you set Anynet+❑(HDMI-CEC) to On in the System menu,
the Device❑List menu appears.
●
Switching to the selected device may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
●
If you have selected external input mode by pressing the SOURCE❑
button, you cannot use the Anynet+ function. Make sure to switch to
an Anynet+ device by using the Device❑List.
To Next Page
Loading...
