◀ ▶
English
How❑to❑set❑up❑manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2. Select the IP❑Settings on network connection screen.
3. Set IP❑Mode❑to Manual.
4. Press the
▼
button on your remote control to go to the first entry field.
5. Enter the IP❑Address,❑Subnet❑Mask, Gateway, and DNS❑Server values.
Use the number buttons on your remote control to enter numbers and the
arrow buttons to move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
To Next Page
Loading...
