4,
Press the A or 'I' button to select a particular frequency to adjust.
Press the _ or _ button to increase or decrease the level of the particular
frequency.
• Mode Selects the sound mode among the predefined settings:
- Balance L/R: Adjusts the balance between the right and left speaker,
-Bandwidth Adjustment (100Hz, 300Hz, l kHz, 2kHz, 3kHz, t0kHz):
To adjust the level of different bandwidth frequencies.
Resetting the Equalizer Settings to the Factory Defaults
5, Press the A or V"button to select "Reset", then press the ENTER _ button.
The equalizer resets to the factory defaults.
Press the EXIT button to exit.
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all muitichannel formats.
t, Press the MENU button to display the menu.
Press the A or 'I' button to select "Sound", then press the ENTER _ button.
2, Press the A or _' button to select 'SRS TruSurround XT", then press the
ENTER _ button.
3, Press the A or V"button to select "Off" or "On", then press the ENTER
button.
Press the EXIT button to exit.
(_ Press the SRS button on the remote control to select "Off' or "On".
I C@) !
SR$ (0_ TruSurround XT, SRS and (o) Symbot are trademarks of SRS Labs, tnc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
To Next Page
Loading...
