3_
The "V-Chip" screen will appear.
Press the A or _" button to select 'Change PIN", then press the ENTER C,_
button. The Change PIN screen will appear. Choose any 4 digits for your
PtN and enter them. As soon as the 4 digits are entered_ the "Confirm new
PtN." screen appears. Re-enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized.
Press the EXIT button to exit.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off. _ Mute _8 2
........._4 Power On.
How to Enable/Disable the V-Chip
to Press the MENU button to display the menu.
Press the A or 'I' button to select "Setup", then press the ENTER _ button.
2, Press the A or 'V button to select 'V-Chip", then press the ENTER
button. The message "Enter PIN" will appear. Enter your 4 digit PIN number.
3_
The "V-Chip" screen will appear.
To enable the V-Chip feature, press the ENTER _ button so that the "V-Chip
Lock" field is 'On". (Pressing the A or T button will alternate between 'On"
and "Off".)
Press the ENTER _ button.
Press the EXIT button to exit.
To Next Page
Loading...
