To Next PageTo Next Page
Need help?Do you have a question about the Samsung LU32J590UQEXXY and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Resolution | 3840 x 2160 |
| Panel Type | VA |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 270 cd/m² |
| Contrast Ratio | 3000:1 |
| Response Time | 4 ms |
| Connectivity | HDMI, DisplayPort |
| AMD FreeSync | Yes |
| Viewing Angle | 178°(H)/178°(V) |
Ensure adequate space around the product for ventilation to prevent overheating and damage.
Important warnings and cautions regarding potential injuries or property damage.
Advice on storing the monitor to prevent surface damage from humidifiers.
Instructions on how to safely clean the monitor's panel and exterior.
Critical safety guidelines for using power cords, plugs, and sockets.
Warnings and precautions to ensure safe and proper installation of the product.
Warnings and guidelines for safe operation, including handling high voltage and avoiding hazards.
Overview of physical parts, control panel, and key guides for navigation.
How to configure Eye Saver, Brightness, Contrast, and Volume from the initial screen.
Details on monitor ports, cables, and connection types.
Adjusting tilt, anti-theft lock, moving precautions, and stand/wall mount installation.
Connecting a PC via HDMI, HDMI-DVI, and DP cables, including audio output.
Connecting power, driver installation, setting optimum resolution, and correct posture.
Optimizing picture quality using MAGIC Bright modes in PC and AV.
Adjusting Brightness, Contrast, and Color for optimal viewing.
Configuring HDMI Black Level, Eye Saver Mode, Game Mode, and Response Time.
Changing picture size, aspect ratio, and screen position.
Enabling or disabling Picture-in-Picture and Picture-by-Picture modes.
Selecting size, sound source, position, and input source for PIP/PBP sub-screens.
Adjusting contrast and picture size for sub-screens in PIP/PBP modes.
Adjusting the transparency of menu windows.
Setting the menu language and configuring OSD menu display duration.
Eliminating screen tearing and lag for improved gaming experience.
Using Eco Saving Plus and Off Timer Plus for energy efficiency and auto power-off.
Configuring PC/AV Mode, DisplayPort version, source detection, and key repeat time.
Managing the Power LED status and resetting all settings to factory defaults.
Viewing current input source, frequency, and resolution.
Guide to installing Easy Setting Box software, system requirements, and potential issues.
Steps to test the product and check resolution/frequency before contacting support.
Troubleshooting installation, screen clarity, stability, brightness, and color problems.
Resolving sound problems and source device specific issues.
Overview of the monitor's general specifications like model, size, and power supply.
Table of supported signal modes, resolutions, and frequencies for optimal display.
Conditions for chargeable service, non-defects, and customer-caused damage.
Covers failures due to natural disasters, consumable parts, and other issues.
