English-5
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are
switched of
f.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Power Input
Connector
SCART 1
SCART 2
Video Audio (L/R) S-Video RGB Video+Audio (L/R)
✔✔ ✔
Only TV Out
✔✔
Monitor Out
(TV/Ext.1/Ext.2/AV3/S-VHS)
Input Output
1-19.qxd 4/8/04 2:18 PM Page 5
Need help?
General
