Cleaning the machine
89
3. Maintenance
12
Cleaning the scan unit
Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day as needed.
• Turn the machine off and unplug the power cord. Wait for the machine to cool down. If your machine has a power switch, turn the power switch off before
cleaning the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Machine overview" on page
20).
1
Slightly dampen a soft, lint-free cloth or paper towel with water.
2
Lift and open the scanner lid.
3
Wipe the surface of the scanner glass until it is clean and dry.
To Next Page
Loading...
