Samsung MAX-878 - CD Deck (Option)

Figure 3-9
3-8 Samsung Electronics
3-6 CD Deck (Option)
Disassembly and Reassembly
1. Remove the Shaft !.
2. Lift the P/U @.
Note : Take extreme care not to touch the surface of lens.
If there is an alien materials, clean it with swab smeared alcohol.
3. Lift the Center-Knob #.
4. Remove the Center-ring $.
5. Remove the Spring-T/Table %.
6. Remove the Turn-Table(M) ^.
7. Remove 2 screws & and then remove the Spindle-Motor *.
8. Remove the Cover-Gear ( by pushing the hook.
9. Remove the Gear(c) ) by pushing the hook.
10. Lift the Gear(b) 1.
11. Remove the Gear(a) 2.
12. Remove 2 screws 3 and then remove the Feed-Motor 4.
13. Remove the Chassis-Deck(M) 5.
4
6
7
13
2
1
9
10
11
12
14
15
8
3
5