32
Option setting Status
13.
Each time you press the button,
will be selected in rotation.
14. Setting Dry mode
Press
button to be change to Dry mode in the OFF status.
15.
Each time you press the button,
will be selected in rotation.
16. Setting Fan mode
Press
button to be change to Fan mode in the OFF status.
17.
Each time you press the button,
will be selected in rotation.
18. Setting Heat mode
Press
19.
Each time you press the button,
will be selected in rotation.
Step 3. Checking the option you have set
button to check whether the option code you have entered is correct or not.
Step 4. Entering an option
Press the operation button
with the direction of a remote controller to set.
For the correct option setting, You must press the on/off button two time shortly.
Step 5. Checking operation
Press the power reset button or the reset button of an outdoor unit to reset the settings.
Take the batteries out of the remote controller and insert them again and then press the
button.
Setting an address and installation option of Universal Comm. Kit
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 32DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 32 2023-01-13 오전 11:35:152023-01-13 오전 11:35:15
To Next Page
Loading...
