To Next PageTo Next Page
Need help?Do you have a question about the Samsung MH026FNEA and is the answer not in the manual?
General| Indoor units quantity | 1 |
|---|---|
| Indoor unit dimensions (WxDxH) | 825 x 189 x 285 mm |
| Indoor unit noise level (high speed) | 32 dB |
| Type | Air conditioner indoor unit |
| Cooling capacity (max) | - BTU/h |
| Air conditioner functions | cooling, heating |
| Cooling capacity in watts (max) | 2600 W |
| Heating capacity in watts (max) | 2900 W |
| Power requirements | 220 - 240 V, 50 Hz |
| Power consumption (typical) | 30 W |
| Outdoor units quantity | 0 |
Guidelines for proper installation to avoid hazards.
Electrical safety requirements for power supply and circuit breakers.
Safety measures to follow during air conditioner operation.
Key features and characteristics of the Multi Inverter series.
Detailed technical specifications for various indoor and outdoor units.
Comparison of Design and Net Weight between Development and Comparative Models.
Indoor unit accessories for MH****FNEA models.
List of necessary tools for disassembly and reassembly procedures.
Procedure for common work and control out on outdoor units.
Indoor unit error codes and their corresponding checks and remarks.
Outdoor unit error codes indicated on the PCB display and their remarks.
Step-by-step guide to enter and set options using the remote control.
Checks to perform before troubleshooting or diagnosing issues.
Exploded views and parts list for indoor units.
Exploded view for outdoor units.
Exploded view and parts list for Assy control out.
PCB diagram for MH****FNEA (Main PCB) showing component locations.
Outdoor PCB diagram for RJ040F2HXEA/RJ050F2HXEA (Main PCB).
Wiring diagram for MH****FNEA indoor units.
Outdoor unit wiring diagram for RJ040F2HXEA/RJ050F2HXEA (Main PCB).
Indoor unit schematic diagram for MH****FNEA/MH****FVEA.
Outdoor unit schematic diagram for RJ040F2HXEA/RJ050F2HXEA (PCB MAIN).
Guidelines for selecting a suitable installation area for indoor and outdoor units.
Procedure for connecting pipes and purging the circuit for various models.
Steps for refilling refrigerant into the air conditioner.
Refrigerant adjustment guidelines based on pipe length and installation conditions.
Torque specifications for flare nut fixing based on outer diameter.
Procedure for pump down when replacing evaporator or relocating the unit.
Index for indoor and outdoor model naming conventions and specifications.
Refrigeration cycle diagrams for various outdoor unit models.
Frequently asked questions about air conditioner troubleshooting and operation.
Basic information about refrigeration and air supplier factors.
