35
Setting the installation option of an Universal Comm. Kit (suitable for the condition of each installation location)
1. Check whether power is supplied or not.
2.
3. Set the installation option of an Universal Comm. Kit according to installation conditions.
4. Set the Universal Comm. Kit option with a remote controller.
02 series installation option
Evaporator Drying
temperature sensor/
when thermostat is off
Central control -
- Hot water heater Contact signal
EEV Step when heating
stops
-
- -
-
Compensation of
heating setting
Oil return/EEV step of
stopped defrost mode
for Heating and Cooling
Indoor unit type
Option
*
MODE Evaporator Drying
Use of central control
Remote
Controller
Display
Indication and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details
Disuse
room temperature
sensor
operation when
thermostat is off
Disuse
Disuse Disuse
Use Disuse
Use
Disuse Heating Use
Use
Use Heating Use
Disuse Cooling Use
Use Cooling Use
Use
Disuse
Use
Disuse
Use
Use
Disuse
B
Use
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 35DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 35 2023-01-13 오전 11:35:162023-01-13 오전 11:35:16
To Next Page
Loading...
