42
Setting an address and installation option of Universal Comm. Kit
Changing a particular option
You can change each digit of set option.
Option
MODE
Option mode to
change
change
Unit digit of an
change
Changed value
Remote
Controller
Display
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
D
Option
mode
Tens’
digit of
Unit
digit of
Changed
value
•
•
Ex) When setting the ‘buzzer control’ into disuse status.
Option
MODE
Option mode
to change
of an option
change
Unit digit of
an option
change
Changed
value
Indication D
NOTE
Setting discharge temperature control
1.
not and also can set targeted temperature of heating and cooling. Refer to “Installation/service setting
2.
to room set temperature and room temperature. Discharge temperature control is carried out while
thermostat is on.
The discharge temperature control can be set using DMS, also.
3.
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 42DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 42 2023-01-13 오전 11:35:182023-01-13 오전 11:35:18
To Next Page
Loading...
