51
Error on tracking
Communication error between Universal Comm. Kit and an outdoor unit during the tracking (During initial operation)
Outdoor unit display
Description Communication error between Universal Comm. Kit and an outdoor unit
Reason Refer to the diagram below.
1. Checking method
Yes
Is the actual number of Universal
Comm. Kit installation the same as
the setting value for the number of
Universal Comm. Kit installation?
No
Compare and check the setting value for the number of
and the real number of Universal Comm. Kit installation.
the display part to check the number of Universal
Comm. Kit which responds to the tracking.
connected to Universal Comm. Kit from an outdoor unit,
No
unit and Universal Comm. Kit and between indoor units.
by connecting one by one.
Yes
Universal Comm. Kit installation set up on the
Is there a response from Universal
Comm. Kit on the display part during the
tracking?
Yes
Kit that displays the communication error.
repeated, communication error may occur. In this
case, the communication error may occur with all
address setting is incorrectly set.
If there is no problem with the address, check
the communication cable and replace the
No
Yes
one indoor unit.
•
the same error shown in the outdoor
unit.
NOTE
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 51DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 51 2023-01-13 오전 11:35:192023-01-13 오전 11:35:19
To Next Page
Loading...
