Disassembly and Reassembly
4-23Samsung Electronics
No Parts Procedure Remark
1
Motor
&
Blower
1) Disassemble the Cabinet Top Motor.
– Unscrew 8 screws
2) Disassemble 2 Cover Blower Uppers.
– After unscrewing 2 screws
– Disassemble the Cover Blower Upper
with pushing its hook.
3) Disassemble the Cover Control.
– Unscrew 2 screws
4) Disassemble Motor Wires connected to
the inside of PCB and connected to the
Capacitor.
4-1-5 MH✳✳✳FEEA (Slim Duct)
24296A(1)_1 11/11/05 5:04 PM Page 4-23
To Next Page
Loading...
