Disassembly and Reassembly
4-33Samsung Electronics
No Parts Procedure Remark
3 Heat Exchanger
&
Compressor
1) Release the refrigerant at first.
2) Disassemble the Inlet and Outlet Pipe by
welding.
3) Loosen the fixing screw of the
Heat Exchanger.
4) Detach the Heat Exchanger.
5) Loosen 3 nuts of the Compressor.
6) Detach the Compressor.
24296A(1)_1 11/11/05 5:04 PM Page 4-33
To Next Page
Loading...
