5.15
PRINTING TASKS
4
If you have created a new or edited an existing watermark,
the Add and Update button is enabled.
To add a new watermark to the list, click Add.
5
To edit, select the desired watermark from the list, edit,
and then click Update.
6
To complete the edit, click OK, and start printing.
To stop printing the watermark, select None in the Message
drop-down list.
1
To change the print settings from your software application,
access the printer properties. See page 5.1 to access the
printer properties.
2
From the WaterMarks tab, select the watermark for
deletion from the Messages drop-down list.
3
Click Delete.
4
Click OK.
To delete a watermark
Printing Watermarks
To Next Page
Loading...
