Samsung ml-1660 - Page 64

Alignment and Troubleshooting
Service Manual
4-16
Samsung Electronics
2) JAM 1
Description : 1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after
passing through the Actuator-Feed.
1. If the paper is
jammed in front of or inside the fuser.
2. If the recording
paper is stuck in the discharge
roller and the fuser just after passing
through the Actuator-Feed, Feed
Actuator may be
defective.
Replace the fuser unit.
Reassemble the Actuator-Feed
and Spring-Actuator if the returning
is bad.