Samsung MM-DG35I - Setting the System Clock; Clock Setting Procedure

ENG
20
CONNECTIONS
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
"CLOCK" is displayed.
2
Press TIMER/CLOCK
twice.
1
Switch the system on
by pressing POWER
button.
•
"TIMER" appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press ENTER.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press ENTER.
The hour flashes.
•
You can display the time, even when you are using another
function, by pressing
TIMER/CLOCK once.
•
You can also use on the panel front instead of
buttons in step 3,4.
Note
MM-DG35i-EUR-ENG-1-0429.indd 23MM-DG35i-EUR-ENG-1-0429.indd 23 2009-5-14 16:29:582009-5-14 16:29:58