CAUTION
◆
Do not use inflammable gases near the receiver &
display unit.
◆
Do not install the receiver & display unit in a location
where it will come into contact with the combustible
gases, machine oil, sulphide gas, etc.
◆
Avoid a location where acid/alkali solution or special
spray is used.
◆
Choose a location that is dry and sunny, but not
exposed to direct sunlight. Available temperature is
between 0
°C(32°F) and 39°C(102°F).
◆
Do not spill water into the receiver & display unit.
◆
Do not give tensile strength to the cable to avoid
disconnection.
◆
Do not press buttons with a pointed thing.
◆
If the receiver & display unit is installed in a hospital
or other special places, it should not affect other
electronic devices.
E-3
ENGLISH
To Next Page
Loading...
