Confidential
Chapter 1 Before Installation
MT6402-48A Installation Manual v1.0 9
Copyright © 2019, All Rights Reserved.
No. Name Specification Purpose of use
11 Optical Connector Cleaner
For LC Connector Cleaning Optical Connector
12 MPO Connector Cleaner
IBC™ Brand Cleaner MT38-
Cleans MT based M38999
For MPO Connector Cleaning
13
Cleaner Jig Receptacle
and Plug
- Cleaning MPO connector
14 Concrete Drill Bit
17 mm Setting M12 Anchor
15 Anchor Punch
M12 Setting M12 anchor
16 Hammer
Normal Fixing anchor
17 Permanent Marker
Should be marked ‘Permanent’ on
the pen (Black Color, 2 mm Tip)
After system installation, I-marking
To mark the site ID, Name on the
name plate, and so on.
(Not to erase permanently)
18 Vacuum Cleaner
Normal
Removing dust during the drilling
work
19 Cable Cutter
0.2-1.3 in. (6 to 32 mm) Cutting cable
20 Crimping Tool
14 AWG-4 AWG (1.5 to 16 mm
2
) Crimping pressure terminal
21 Cable Stripper
Apply cable thickness: 1.5 to 6.2
in. (4 to 16 mm)
Removing cable sheath
22 Nipper
Basic Tool Cutting cable
23 Flush cutter
Basic Tool For cutting cable tie
24 Industrial Scissor
Basic Tool Cutting
25 Knife Basic Tool Cutting
To Next Page
Loading...
