Confidential
Chapter 1 Before Installation
MT6402-48A Installation Manual v1.0 10
Copyright © 2019, All Rights Reserved.
No. Name Specification Purpose of use
26 Heating Gun
50 to 300°C Shrinking the feeder cable tube
27 Multi tester
Digital Pocket Tester
Checking voltage and current to
detect cable disconnection
28 Angle Meter
Normal Checking MMU Tilting
29 Fiber Optical Test Set
Wave length:
1270 nm, 1310 nm, 1550 nm
(single mode)
850 nm, 1310 nm (multi-mode)
Checking optical level
30 Antenna Alignment Tool
- Checking azimuth and tilting
The required installation tools may vary depending on the site conditions.
In addition to the basic tools, protractor, ladder, safety equipment and cleaning
tools must be arranged considering the site conditions.
To Next Page
Loading...
