3.5
SENDING TEXT MESSAGES
3.6
SETTING UP YOUR BLUETOOTH
®
1. Press the key below the word “Menu.”
2. Using your navigation keys, go to “Tools,” then press the key in the
center of your navigation keys.
3. “Bluetooth” will be highlighted. Press the key in the center of your
navigation keys.
4. “Registered List” will appear highlighted. Press the key in the
center of your navigation keys.
5. “Add New Device” will be highlighted. Press the key in the center
of your navigation keys.
6. “Place device you are connecting to in Discoverable Mode” will
be displayed. Press the key in the center of your navigation keys.
“Searching” will be displayed and a list with the available
Bluetooth devices will populate.
7. Go to your Bluetooth
®
device, then press the key in the center of
your navigation keys.
8. If you are prompted for a passcode, please refer to your headset’s
user guide. 0000 is a commonly used passcode for headsets.
Enter this number into your phone and press the key in the center of
your navigation keys. Wait for the devices to pair.
9. The display will prompt you for confirmation. Press the key below
the word “Yes” to confirm. “Bluetooth Connection Completed”
will be displayed.
3.6
SETTING UP YOUR BLUETOOTH
®
To pair your phone with a Bluetooth
®
Headset make sure that both
your headset and your phone are fully charged. To ensure a successful
pairing, pair your devices in a private environment away from other
devices with Bluetooth
®
. Have your headset within a range of 30 feet
from your phone.
Make sure your device is on and in Pairing or Bonding Mode (refer to
the user guide of the device you are attempting to pair with). Please
remember you can connect to only one device at a time.
5a. ENTER
NUMBER
5b. PRESS
6a. ENTER
MESSAGE
6b. PRESS
(Continued from previous page)
To Next Page
Loading...
Need help?
General
