Using the TPM Security Device
(Optional)
7
After the program is completely installed, click Close.
8
Close the SW Update window and reboot your computer
again.
Registering the TPM program
1
On the Start screen, click the bottom-left icon ,
and then click Inneon Security Platform Solution >
Security Platform Managment > User Settings. (Run as
administrator)
Alternatively, double-click the
icon on the Taskbar and
run initialization with administrator authority.
2
The security authentication settings begin with the
Initialization Wizard. When the Initialization Wizard appears,
click Next.
If the status not initialized message appears, click Yes.
If you backup the emergency recovery le to an external
storage device according to the instructions of the
Initialization Wizard, you can use the TPM security device
more safely.
To Next Page
Loading...
