Adding a Hard Drive
(optional, 550P7C models only)
4
Attach the connector to the new drive and insert the drive
into the secondary hard drive bay.
Connector
z
x
5
Connect the unconnected end of the cable to the connector
on the computer so that the white dot on the connector of
the cable is on the right.
6
Fasten the case screws.
Case Screws
7
Attach the hard drive bay cover and fasten the screws.
Once you have installed a secondary hard drive, format it in
accordance with the instructions in the user manual of the
hard drive before use.
To Next Page
Loading...
