Samsung NP700G7A - Page 56

54
55
Chapter 3.
Using the computer
Connecting through the HDMI/DP port (Optional)
By connecting the computer to a TV with a HDMI/DP port, you
can enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI/DP, you have to congure
the screen and sound.
1
Connect the HDMI/DP cable to the HDMI/DP port of the TV.
External
Monitor
TV
Projector
This is only supported for models that support a TV output •
port (HDMI/DP).
When a TV provides more than one HDMI port, connect •
the computer to the DVI IN port.
When connecting the computer to a TV, switch the •
external input mode of the TV to HDMI/DP.
2
Press the + key once to display a window to select
the monitor mode. Select a mode.
3&୘ִփ
ـࢿ
୙ࢠ
ѿء୘ִփ
PC Monitor Screen
The contents are only displayed on the PC
monitor (current device).
3&୘ִփ
ـࢿ
୙ࢠ
ѿء୘ִփ
Duplicate
The contents of the current device are displayed
on the external device as well.
3&୘ִփ
ـࢿ
୙ࢠ
ѿء୘ִփ
Expand
The screen of the current device is expanded to
the external device.
3&୘ִփ
ـࢿ
୙ࢠ
ѿء୘ִփ
Second Screen
The contents are displayed only on the screen of
the external device.
External Monitor / TV is not supported in the DOS •
Command Prompt window.
Simultaneous output to all 3 (LCD + CRT + HDMI) is not •
supported.
Connecting an External Display Device