Samsung NP700G7A - Upgrading Memory

82
83
Chapter 4.
Settings and Upgrade
Changing the Boot Priority
As an example, the procedures to change the highest boot priority
device to the hard disk drive are described below.
The screen images and terms may dier from actual product
depending on the computer model and driver version.
1
Select the Boot menu in the BIOS Setup.
2
Press <Enter> on the Boot Device Priority item.
XXXXXXXX
6QWEJ2CF/QWUG ='PCDNGF?
+PVGTPCN.#0 ='PCDNGF?
2:'1241/ =&KUCDNGF?
5OCTV$CVVGT[%CNKDTCVKQP
3
Press the down key (
↓
) to move to the SATA HDD item and
press the F6 key to move up to the top item.
Boot Menu
[Set Boot Priority]
1. SATA CD : XXXXXXXXXXX
2. SATA HDD : XXXXXXXXXXX
3. USB KEY : N/A
4. USB CD : N/A
5. USB FDD : N/A
6. USB HDD : N/A
7. NETWORK : N/A
8. SATA HDD : XXXXXXXXXXX
4
Press the F10 key to save the settings and exit Setup.
The highest boot priority device is now set to the Hard Drive.