27
45 External call forwarding
55 Date and time
74 Assign headset operation
Technician Programming
The technician-level password allows access to all programming procedures including station and
customer programs.
Number Function
20 Enable/disable technician programming
21 Change technician password
24 Software version display
25 System initialisation
26 Night mode dialling classes
30 Class of service
31 C.O. line access
32 Internal paging
33 Deny codes class of service “B”
34 Allow codes class of service “B”
35 Deny codes class of service “C”
36 Allow codes class of service “C”
37 Allow codes class of service “D”
39 Assign barge-in status (override)
40 Dial 80 group
41 C.O. line incoming/outgoing assignment
42 C.O. line pulse/tone selection
44 C.O. or PBX line selection
45 External call forwarding
46 Private or non-private lines
47 Dial 9 group
49 Forward C.O. lines
50 C.O. flash timing
51 PBX flash timing
52 Hold/camp-on recall time
53 Transfer ring time
54 Alarm time duration
55 Date and time
57 C.O. to C.O. duration timer
59 External call forward timer
60 C.O. line ring mode
61 Night ringing assignment
62 Day ringing assignment
63 Door phone ringing assignment
67 Camp-on tone interval
70 Attendant assignment
71 System speed dial restriction
74 Assign headset operation
** Toll restriction examples (shown after program number # 37 in
this manual)
LCR Programming (Technician)
900 LCR Enable
901 LCR Digit Table
902 LCR Route Table
903 LCR Modify Digit Table
To Next Page
Loading...