46
000 1 01 00
001 2 01 00
002 3 01 00
003 4 01 00
004 5 01 00
005 6 01 00
006 7 01 00
007 8 01 00
008 9 01 00
009 0345 04 00
010 01426 05 00
011 01459 05 00
012 0800 04 00
013 0941 04 00
Related items : MMC 902 LCR Route Table
MMC902 LCR Route Table
LCR Route Table is responsible for selecting a specific trunk group in the completion of an outward
bound call. This table works in conjunction with LCR Digit Table and LCR Modify Digit Table. After
the user dials a valid digit string, the system uses LCR Route Table to select a specific predetermined
trunk group. A maximum of 16 routes are available, beginning with the Route Number.
If more than one group is available for call completion, the system will use the first designated trunk
group and then start to use succeeding trunk groups. If all trunk groups are busy in a selected route,
call queue will become active and allocate trunks as they become available.
Action Display
1. Press CONF key and 902
2. Dial route number
OR
Press MSG key to select index (0-15)
3. Press ALM key to select COS
4. Dial LCR COS number (0-7)
5. Dial ALM key to input trunk group
6. Enter trunk group number (9 or 80)
7. Enter ALM key to select Modify Digits index
number
8. Dial Modify Digits index number (00-99)
9. If you want to continue, go to step 2
10. Press CONF key to store and exit
(If you want to delete any item, press HOLD key in any state.)
Default data:
LCR:ROUTE (00)
LCR:ROUTE (01)
COS:
COS:0
TRK GRP:
TRK GRP:09
MODI:
MODI:00
To Next Page
Loading...