50
1. Press CONF key and 909
2. Press MSG key to make selection
3. Enter the desired access code via dial keypad
(up to 10 digits)
4. Press CONF key to store and exit.
(If you want to delete any item, press HOLD key in any state.)
Default date : None
Related items: MMC905 Assign PIN Code
MMC902 LCR Route Table
MMC908 LCR Network Code
MMC910 Call Cost Code
The secondary network system can have the ability to itemise calls on a cost centre basis. If this
facility is activated, the call cost centre code needs to be entered immediately following transmission of
the authorisation code.
Action Display
1. Press CONF key and 910
2. Press MSG key
3. Enter call cost code (up to three digits)
4. Press CONF key to store and exit.
MMC911 Dial Start Time
Used to provide a delay before dialling to C.O. line.
Action Display
1. Press CONF key and 911
Display shows current timer (default value is 4 sec)
2. Enter data (000 - 200)
3. Press CONF key to store and exit.
PIN CODE:
0:
0: 123
CALL COST CODE
21:CODE:
21:CODE:123
DIAL START TIME
004SEC
To Next Page
Loading...