Samsung NX1100 - Correcting the Red-Eye Effect; Adjusting the Flash Intensity

77
Shooting Functions > Flash
Correcting the red-eye effect
If the flash fires when you capture a photo of a person in the dark,
a red glow may appear in the eyes. To correct the red-eye effect, select
Auto Red-eye or Fill-in Red .
Without red-eye correction With red-eye correction
If the subject is too far from the camera or moves when the first flash fires,
red-eyes may not be reduced.
Adjusting the flash intensity
Adjust the flash intensity to avoid overexposure or underexposure.
You can adjust it ±2 levels.
To set the flash
intensity,
In Shooting mode, press [f] → Flash → an option →
[D]
→ rotate the navigation button or press [C/F].
Flash Option
Back Reset
Flash : Fill in