My Camera > Accessories
41
Connecting the flash
1
Remove the hot-shoe cover from the camera.
2
Connect the flash by sliding it into the hot-shoe.
•
To release the flash, gently pull the flash while you press the
PUSH button.
3
Press the power button on the flash.
•
You can capture a photo with a flash that is not fully charged, but it is
recommended to use a fully charged flash.
•
Refer to the optional accessories page for available external flashes.
(p. 177)
•
The available options may differ depending on the shooting mode.
•
There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
•
For more details about optional flashes, refer to the user manual for the
flash.
Use only Samsung-approved flashes. Using incompatible flashes may
damage your camera.
To Next Page
Loading...
