15
Clearance for wall mounting
Installing the outdoor unit only
• When installing close to the wall, maintain a sufficient clearance in order to secure air flow.
• Clearance for OH46F/OH55F (
): 50 mm or more
• Clearance for OH75F/OH85F (
)
– Example 1) Exposure to direct sunlight: 200 mm or more
– Example 2) Atmospheric temperatures under 35 ℃ without direct sunlight: 60 mm or more
• Add partitions between the inlet and outlet to prevent discharged air from flowing back into the inlet.
"
If the unit is subjected to excess heat due to an insufficient gap, this may cause a malfunction, which will not be covered by the warranty.
Wall or
obstacle
OH46F/OH55F
Partition
Partition
Side view
OH75F/OH85F
Wall or
obstacle
Partition
Side view
To Next Page
Loading...
