68
Color Temperature
MENU m → Picture → Color Temperature → ENTER E
Picture
Color Temperature
16000K
―
The displayed image may differ depending on the model.
It sets color temperature. The value and temperature increase simultaneously, so the ratio of blue color rises. (Range:
2800K–16000K)
―
Enabled when Color Tone is set to Off.
―
Color Temperature is disabled if Picture Mode is set to Calibration.
White Balance
MENU m → Picture → White Balance → ENTER E
Picture
White Balance
―
The displayed image may differ depending on the model.
2 Point
Adjust the color temperature for a more natural picture.
• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
• Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
• Off / On
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Suitable for environments where videowall display are used.
―
Some external devices may not support this function.
―
Enabled when Picture Mode is set to Office & School (Video/Image).
To Next Page