Samsung P2250(G) - Monitor Disassembly and Assembly Guide; Step-by-Step Disassembly Process

3-1
3. Disassembly and Assembly
3. Disassembly and Assembly
This section describes the disassembly and reassembly sequences for this monitor.
Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Caution: 1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Disassemble the monitor carefully as directed in the following procedures.
Description Photo Screws
1. Place a soft cloth on a table, place the monitor
face down on the table, and separate the stand
by holding the Stand Body with both hands while
pushing the Stand Body with your thumb.
(At this time, your forenger must be supporting
the bottom of the product.)
Caution : Take care when separating the stand
as separating the stand with excessive
force by tilting the stand may break the
Lock Spring.
2. To separate the front cover, turn the monitor over,
insert your ngers into the center between the
panel and the front cover of the monitor and then
separate the front cover as shown by the gure.