6-4
6. Wiring Diagram
6-3. Connector Functions
Connector Functions
CN600 Supplies 5V from the power board to the main board and transmits the PWM output from the
power board to the inverter.
*When a problem occurs: The No Power and Blank Screen errors may occur.
CN1 ~ CN4 In Transmits the lamp current (6mA ~ 7mA) generated in the inverter to the lamp of the panel.
* When a problem occurs: The Blank Screen error may occur.
CN103 VGA signal input terminal
* When a problem occurs: The No RGB output error may occur.
CN400 Transmits the LVDS signals from the main board to the panel.
* When a problem occurs: The Blank screen and No Power errors may occur.
6-4. Cables
Use LVDS 30P FFC cable
Code BN96-02854Y
Photo
To Previous Page
Loading...
