■
Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
N
You can find the network connection values in control panel of Windows
computers.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Select the IP Settings on network connection screen.
N
When it fails to connect the wireless network automatically, the IP
Settings is available to select.
2. Set IP setting to Enter manually.
3. Move to each field using
▲/▼/◄/►
buttons. Enter the network connection
values, and then select OK.
4. The network connection screen appears, and network setting is done.
English
To Next Page
Loading...
