N
NOTE
●
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Select the Position. Press the ENTER
E
button.
2. Press the
▲
,
▼
,
◄
or
►
button to move the picture.
●
If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
●
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
●
4:3 Screen Size: Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS (Wide Screen Service)
size or the original size. Each country requires different picture size.
English
To Next Page
Loading...
