–
Manual: Set the current time manually.
N
Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Date and Time.
N
Available only when Clock Mode is set to Manual.
N
You can set the Date and Time directly by pressing the number buttons
on the remote control.
Time Zone (Australia only): Select your time zone.
N
This function is only available when the Clock Mode is set to Auto.
Time Offset
for PDP 4900 series
: Adjusts the time when your TV receives the
time information via Internet. Set the right time by selecting an offset.
N
The current time will be set through a network, if the TV fails to receive
the time information including the broadcast signal from TV stations. (ex:
Watching TV via set-top box, Satellite receiver, or etc)
English
To Next Page
Loading...
