14
English
Basic Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1
Press the POWER button on the remote control. Select the OSD Language.
menu is automatically displayed. Select the appropriate language by pressing the
▲ or ▼ button.
Press the ENTER
E
button to confirm your choice.
2
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTER
E
button.
We recommend setting the TV to Home Use mode for the best picture in
your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return
to Home Use (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for 5
seconds.
3
Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or
▼ button. Press the ENTER
E
button to confirm your choice.
4
Press the ▲ or ▼ button to memorize the channels of the selected connection,
then press the ENTER
E
button.
Air: Air antenna signal.
Cable: Cable antenna signal.
5
Press the ▲ or ▼ button to select the channel source to memorize. Press the
ENTER
E
button to select Start.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analoguechannels.oguechannels.e channels.
For more detailed description of selecting Cable mode, refer to page 15.
The channel search will start and end automatically.
6
The message Set the Clock Mode is displayed. Press the ENTER
E
button.
Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If you select Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically.
7
The brief instruction on How to get the best performance from your new HDTV
is displayed. Press the ENTER
E
button.
This menu is available HD Connection Guide in the Support menu.
You can change previous or next page by pressing the ◄ / ► button.
8
The message Enjoy your TV. is displayed.
If you want to view the TV immediately, select the Watch TV.
If you want to view the See Product Guide, press the ENTER
E
button.
If you want to reset this feature...
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select
Setup, then press the ENTER
E
button.
2
Press the ENTER
E
button again to select Plug & Play.
3
Enter your 4 digit PIN number.
The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, refer to page 30.
■
■
■
■
■
■
■
■
•
•
■
■
■
■
■
■
■
■
The Plug & Play feature is only
available in the TV mode.
■
Basic Operation
If you accidentally select the
wrong country for your TV, the
characters on the screen may be
wrongly displayed.
The Screen Saver is activated
if there is no remote control key
input for longer than 1minute
while Plug & Play is running.
The Screen Saver is activated if
there is no operating signal for
longer than 15 minutes.
■
■
■
Plug & Play
Select the OSD Language.
Menu Language :
E
Enter
▲
Nederlands
English
Eesti
▼
Setup
Plug & Play ►
Language : English
Time
Game Mode : Off
BD Wise : On
Network Type : Cable
Network Setup
Child Lock : On
To Next Page
Loading...
